Looking for a quick and easy way to add a mid century modern accent wall to your home? This simple DIY wood accent wall tutorial will walk you through exactly how to do it in a weekend.
Hello Friends- I have a quick and easy DIY for you today. I am laughing as I write this as I am known for my accent walls (I have promised no more on a few occasions), and well, here I go again. 😉 Today, I am sharing my version of a Mid-Century Modern Wood Accent Wall.
We recently renovated our basement into a game room of sorts (see it here). I planned a wallpaper mural on one wall that was a very, very bold choice for me, so I felt there would be plenty of visual interest. But as often happens in design, once we started on the actual space, I felt as if the wall at the very back of the room needed something to draw your eye back through the room.
As I mentioned above, my inspiration for adding this mid century accent wall was to draw attention through the room. Here are a few reasons you may want to add an accent wall:
You won’t need much for this weekend project – in fact, if you’ve been doing any type of homo reno, you may have most of these things on hand already.
*This post contains affiliate links; I may earn a small commission if you purchase them. I promise I only recommend products I use and LOVE! 🙂
This is straightforward DIY and took me less than a weekend to finish.
Measure and buy the boards needed. First up was a trip to my local Home Depot, and I bought twenty- 1 x 2 x 10 boards to cover the wall as far as the door. The amount of boards you’ll need will depend on the size of the wall you’re using.
Cut the boards. Then I used a saw to cut the boards so they overlapped in the upper third of the wall by four inches. I used the width of a board between each piece as a guide (because it was easy), and I liked the spacing.
Attach the wood to the wall. For the next step, I attached the wood with a bit of wood glue and a pneumatic nail gun. I use this nail gun but they are usually available to rent from your local home improvement store. I continued to attach the boards to the end of the wall. This goes quickly.
The total time was about 30 hours, but that was because of all the waiting for the paint and primer to dry. Hands-on time was much less than that. I would recommend splitting this project over 2 days but it can easily be finished in a weekend.
The key to any DIY wood accent wall project is to use a lightweight wood on the thinner side. You don’t want it to stick off the wall too far but, most importantly, the wall needs to be able to support it. I used pine here because it was inexpensive.
As you can see in the photos, I opted for a very earthy green (SW Retreat) for my mid century modern feature wall. The color you’ll want to paint your accent wall will depend on the rest of your decor, of course, but here are a few ideas if you want to go for the mid century modern feel.
In general, mid century modern colors are muted earth tones with pops of brightness, so keep that in mind when choosing your colors.
Here is a close-up of the finished accent wall.
I think it was exactly what the room needed! It added enough visual interest that you look back when you walk into the room, which gives the room more balance. Here is the bold wallpaper that I was trying to balance.
Interested in shopping this post? Shop here:
Are you looking for more accent wall inspiration? Take a look at this article by Porch.com.
That’s it. I hope I have inspired you to try your own DIY accent wall!
Until next time,
PS. These awesome pics are from my friend Helen Gardner. If you are looking for a photographer in the midwest, I highly recommend her!